Lightforce Dual USB Outlet In-dash (Hilux/Landcruiser/Prado)

Special Price $27.16 Regular Price $28.00
In stock
Lightforce Dual USB Outlet In-dash (Hilux/Landcruiser/Prado) is available to buy in increments of 1

Lightforce Dual USB Outlet In-dash (Hilux/Landcruiser/Prado)

Lightforce Dual USB Outlet In-dash (Hilux/Landcruiser/Prado)


  • 1 x USB Outlet
  • 1 x Short harness and adaptor
  • 1 x Instructions

This Dual 2.1 amp USB charger is designed to suit Toyota vehicles with a 32mm x 20mm switch panel.

Suitable for charging high powered devices like tablets, mobile phones and gaming consoles or powering navigation units and in car DVR's.


  • Dual 2.1 amp (4.2A in total) outputs that are fully regulated and surge protected.
  • Independent illumination that is fully dimmable via existing dash light circuit, separate from the main input power, so illumination is not always on; a unique feature of our product.  
  • All cables are over 1.5 metres long, USB power input (red wire) in is fitted with a fuse tap for direct fitment to the fuse box. Earth cable (black wire) is pre-terminated with a ring terminal and independent LED illumination (blue wire) for connection to existing dash light circuit.


  • USB Charger Dual Outlet
  • Dual 2.1A (4.2A) outlets 
  • 5.1 Volts regulated output 
  • 1.5 Metre long cables
  • 5 Amp fuse tap for dual USB outlets
  • 2 Amp fuse for illumination
  • Independent blue LED illumination 
  • Matte black face

    Compatible vehicles:
  • 4Runner 2010 - Current  
  • 200 Series Landcruiser 2008 - Current
  • FJ Cruiser 2011 - 2013 (Roof Console only)
  • Hilux 2015 - Current
  • Kluger/Highlander 2008 - Current              
  • Prado 150  2010 - Current
  • RAV4 2006 - 2012
  • Toyota 86           
  • Tundra 2008 - Current

May also be compatible with Toyota models including Camry, Corolla and Yaris models, confirm size is 32mm x 20mm before purchasing.


  • Red wire – USB positive wire can be connected in the following ways.
  • To an ignition source so the unit is only powered once the vehicle is on; or to an always on source so the unit is active continuously.
  • Blue wire - Positive wire connects to the existing dash light circuit so LED illumination is only active once headlights are on.
  • Black wire - Fit to vehicles earth simply connect ring terminal to an existing M6 bolt that is grounded.

NOTE: All vehicle accessories should be wired through a fuse if the included harness is modified during installation ensure a fuse is used as close to the input source as possible, not exceeding 5 amps.

More Information
Manufacturer Lightforce
Write Your Own Review
You're reviewing:Lightforce Dual USB Outlet In-dash (Hilux/Landcruiser/Prado)
Your Rating